Onkyo TX-SR604 Instruction Manual Download Page 11

Page: 11 / 92

Front & Rear Panels

—Continued

ZONE 2 LINE OUT (79)

This analog audio output can be connected to a line
input on an integrated amplifier in Zone 2.

DVD IN

Here you can connect a DVD player. Input jacks
include S-Video, composite video, and analog
audio. You can connect a DVD player’s 2-channel
analog audio output or 7.1-channel analog audio
output.

VIDEO 1 IN/OUT

Here you can connect a VCR. Input and output
jacks include S-Video, composite video, and analog
audio.

VIDEO 2 IN/OUT

Here you can connect a VCR. Input and output
jacks include S-Video, composite video, and analog
audio.

VIDEO 3 IN

Here you can connect a video source (VCR, set-top
box, etc.). Input jacks include S-Video, composite
video, and analog audio.

TAPE IN/OUT

This analog audio input and output are for connect-
ing a recorder with an analog audio input and output
(cassette, Mini Disc, etc.).

CD IN

This analog audio input is for connecting a CD
player’s analog audio output.

COMPONENT VIDEO OUT

This component video output can be used to con-
nect a TV or projector with a component video
input.

COMPONENT VIDEO IN 1, 2, 3

These component video inputs can be used to con-
nect AV components with component video outputs,
such as DVD players.

REMOTE CONTROL

This

(Remote Interactive) jack can be con-

nected to an

jack on another Onkyo AV compo-

nent. The AV receiver’s remote controller can then
be used to control that component. To use

, you

must make an analog audio connection (RCA)
between the AV receiver and the other AV compo-
nent, even if they are connected digitally.

See pages 18-36 for connection information.

Summary of Contents for TX-SR604





























































































Search results

Summary of Contents for TX-SR604

Reviews:

Related manuals for TX-SR604

Brands by name

Popular brands

Onkyo TX-SR604, Instruction Manual

Search results

Summary of Contents for TX-SR604

Reviews:

Related manuals for TX-SR604

Brands by name

Popular brands