Onkyo TX-SR403 Instruction Manual Download

Page: 50 / 56

Troubleshooting

If you have any trouble using the AV receiver, look for a
solution in this section. If you can’t resolve the issue
yourself, contact your Onkyo dealer.

Can’t turn on the AV receiver?

• Make sure that the power cord is properly plugged into

the wall outlet.

• Unplug the power cord from the wall outlet, wait five

seconds or more, then plug it in again.

The AV receiver turns off as soon as it’s turned
on?

• The amp protection circuit has been activated.

Remove the power cord from the wall outlet immedi-
ately. Disconnect all speaker cables and input sources,
and leave the AV receiver with its power cord discon-
nected for one hour. After that, reconnect the power
cord, and then set the volume to maximum. If the AV
receiver stays on, set the volume to minimum, discon-
nect the power cord, and reconnect your speakers and
input sources properly. If the AV receiver turns off
when you set the volume to maximum, disconnect the
power cord, and contact your Onkyo dealer.

There’s no sound or it’s very quiet?

• Make sure that the digital input source is selected

properly (page 31). Press the [DIGITAL INPUT] but-
ton repeatedly.

• Make sure that all audio connecting plugs are pushed

in all the way (page 20).

• Make sure that the polarity of the speaker cables is

correct, and that the bare wires are in contact with
metal part of each speaker terminal (page 17)

• Make sure that the speaker cables are not shorting.
• Check the volume. It can be set to MIN, 1 through 79,

or MAX (page 34). The AV receiver is designed for
home theater enjoyment and has a wide volume range
for precise adjustment.

• If the MUTING indicator is shown on the display,

press the remote controller’s [MUTING] button to
unmute the AV receiver (page 38).

• While a pair of headphones is connected to the

PHONES jack, no sound is output by the speakers
(page 39).

• Check the digital audio output setting on the con-

nected device. On some games consoles, such as those
that can play DVDs, the default setting is off.

• With some DVD-Video discs, you need to select an

audio format from a menu.

• If your turntable doesn’t have a phono preamp built-in,

you must connect one between it and the AV receiver.

If your turntable uses an MC cartridge, you must con-
nect an MC head amp, or an MC transformer and a
phono preamp.

• Specify the speaker distances and adjust the individual

speaker levels (pages 48, 49).

• The input signal format is set to PCM or DTS. Set it to

Auto (page 49).

Only the front speakers produce sound?

• When the Stereo or Mono listening mode is selected,

only the front speakers and subwoofer produce sound.

• Make sure the speakers are configured correctly

(page 32).

Only the center speaker produces sound?

• If you use the Pro Logic IIx Movie or Pro Logic IIx

Music listening mode with a mono source, such as an
AM radio station or mono TV program, the sound is
concentrated in the center speaker.

• Make sure the speakers are configured correctly

(page 32).

The surround speakers produce no sound?

• When the Stereo or Mono listening mode is selected,

the surround speakers produce no sound (page 40).

• Depending on the source and current listening mode,

not much sound may be produced by the surround
speakers. Try selecting another listening mode.

• Make sure the speakers are configured correctly

(page 32).

The center speaker produces no sound?

• When the Stereo or Mono listening mode is selected,

the center speaker produces no sound (page 40).

• Make sure the speakers are configured correctly

(page 32).

The surround back speaker produces no
sound?

• The surround back speaker is not used with all listen-

ing modes. Select another listening mode (page 40).

• Not much sound may be produced by the surround

back speaker with some sources.

• Make sure the speakers are configured correctly

(page 32).

The subwoofer produces no sound?

• The subwoofer outputs no sound while only speaker

set B is on. Turn on speaker set A.

• When you play source material that contains no infor-

mation in the LFE channel, the subwoofer produces
no sound.

• Make sure the speakers are configured correctly

(page 32).

• If the multichannel DVD input is selected and speaker

set B is on, speaker set A is reduced to 2-channel play-
back, so the subwoofer outputs no sound.

Power

Audio

TX-SR403̲En.book Page 50 Friday, April 29, 2005 10:55 AM

Summary of Contents for TX-SR403

























































Search results

Summary of Contents for TX-SR403

Reviews:

Related manuals for TX-SR403

Brands by name

Popular brands

Onkyo TX-SR403, Instruction Manual

Search results

Summary of Contents for TX-SR403

Reviews:

Related manuals for TX-SR403

Brands by name

Popular brands