Onkyo TX-SR403 Instruction Manual Download | Manualshive

Page: 18 / 56

background image

18

Connecting Antenna

This section explains how to connect the supplied indoor
FM antenna and AM loop antenna, and how to connect
commercially available outdoor FM and AM antennas.
The AV receiver won’t pick up any radio signals without
any antenna connected, so you must connect the antenna
to use the tuner.

The supplied indoor FM antenna is for indoor use only.

If you cannot achieve good reception with the supplied
indoor FM antenna, try a commercially available out-
door FM antenna instead (see page 19).

The supplied indoor AM loop antenna is for indoor use
only.

If you cannot achieve good reception with the supplied
indoor AM loop antenna, try using it with a commer-
cially available outdoor AM antenna (see page 19).

Connecting the Indoor FM Antenna

1

Attach the FM antenna, as shown.

■

American Model

■

Other Models

Once your AV receiver is ready for use, you’ll
need to tune into an FM radio station and adjust
the position of the FM antenna to achieve the best
possible reception.

2

Fully extend the antenna and point it in
various directions to find the best recep-
tion. Secure it in that position with thumb-
tacks or something similar.

AM antenna push terminals
FM antenna jack

Insert the plug fully into the jack.

Insert the plug fully
into the jack.

Connecting the AM Loop Antenna

1

Assemble the AM loop antenna, inserting
the tabs into the base, as shown.

2

Connect both wires of the AM loop
antenna to the AM push terminals, as
shown.

(The antenna’s wires are not polarity sensitive, so
they can be connected either way around).
Make sure that the wires are attached securely and
that the push terminals are gripping the bare
wires, not the insulation.

Once your AV receiver is ready for use, you’ll
need to tune into an AM radio station and adjust
the position of the AM antenna to achieve the best
possible reception.
Keep the antenna as far away as possible from
your AV receiver, TV, speaker cables, and power
cords.

Push Insert

wire

Release

TX-SR403̲En.book Page 18 Friday, April 29, 2005 10:55 AM

«
...
16
17
18
19
20
...
»

Summary of Contents for TX-SR403

























































Reviews:

No comments

Related manuals for TX-SR403

Brand: Panasonic Pages: 10

CQCM130U - MP3 CD RECEIVER

Brand: Panasonic Pages: 2

CQC800U - AUTO RADIO/CD DECK

Brand: Panasonic Pages: 38

CQC800U - AUTO RADIO/CD DECK

Brand: Panasonic Pages: 24

CQC500U - CD Receiver With Changer Control

Brand: Panasonic Pages: 8

CQC1304U - AUTO RADIO/CD DECK

Brand: Panasonic Pages: 4

Brand: Panasonic Pages: 30

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 48

Brand: Panasonic Pages: 8

Brand: Panasonic Pages: 2

CQVX100U - Car Audio - DVD Receiver

Brand: Panasonic Pages: 24

CQDFX403U - AUTO RADIO/CD DECK

Brand: Panasonic Pages: 5

Brand: Panasonic Pages: 20

CQC1103U - AUTO RADIO/CD DECK

Brand: Panasonic Pages: 16

CQCP134U - AUTO RADIO/CD DECK

Brand: Panasonic Pages: 16

Brand: Harman Kardon Pages: 2

Brand: Harman Kardon Pages: 44

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands