140
≫
≫
≫
≫
≫
≫
Setting Item
Default Value
Setting Details
Height 1
0.0 dB
After selecting the speaker frequency between
"25 Hz" and "16 kHz" with the cursors
/ , adjust
the volume of that frequency between "-6.0 dB" and
"+6.0 dB" with
/ .
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Height 2
0.0 dB
After selecting the speaker frequency between
"25 Hz" and "16 kHz" with the cursors
/ , adjust
the volume of that frequency between "-6.0 dB" and
"+6.0 dB" with
/ .
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Surround
0.0 dB
After selecting the speaker frequency between
"25 Hz" and "16 kHz" with the cursors
/ , adjust
the volume of that frequency between "-6.0 dB" and
"+6.0 dB" with
/ .
Surround Back
0.0 dB
After selecting the speaker frequency between
"25 Hz" and "16 kHz" with the cursors
/ , adjust
the volume of that frequency between "-6.0 dB" and
"+6.0 dB" with
/ .
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Subwoofer
0.0 dB
After selecting the speaker frequency between
"25 Hz" and "160 Hz" with the cursors
/ , adjust
the volume of that frequency between "-6.0 dB" and
"+6.0 dB" with
/ .
•
This cannot be selected if "Configuration" -
"Subwoofer" is set to "No".
•
Depending on the input source or listening mode setting, the desired effect may not be
achieved.
7. THX Audio
Change the THX Audio settings.
Setting Item
Default Value
Setting Details
Back Speaker
Spacing
>4.0 ft/>1.2 m
Select the distance between the surround back
speakers from "<1.0 ft/<0.3 m", "1.0 - 4.0 ft/0.3 -
1.2 m", and ">4.0 ft/>1.2 m".
• The unit of distance (ft/m) is displayed using the
unit selected for the "Distance" setting.
•
The setting cannot be changed if "Configuration"
- "Zone Speaker" is set to a selection item other
than "No" and Zone 2 is on.
•
If the item cannot be selected even though
connection is correct, check if the setting in
"Configuration" - "Speaker Channels" matches
the number of connected channels.
THX Ultra / Select
Subwoofer
No
Set whether a THX-certified subwoofer is
connected or not.
"Yes": When a THX-certified subwoofer is
connected
"No": When a THX-certified subwoofer is not
connected
•
The setting cannot be changed if "Configuration"
- "Subwoofer" is set to "No"
BGC
Off
Correct an emphasized bass sound when listening
to music near the wall or boundary of the room due
to layout limitation of the listening room. The THX
Select receivers can adjust the balance of bass
sound.
"On": When this function is used
"Off": When this function is not used
•
In the following cases, the setting cannot be
changed:
–
"Configuration" - "Subwoofer" is set to "No".
–
"THX Ultra / Select Subwoofer" is set to "No".
