Onkyo TX-NR1030 Advanced Manual Download | Manualshive

Page: 55 / 102

background image

55

Advanced Speaker Connection

Advanced Speaker Connection

Bi-Amping

It is possible to connect speakers supporting bi-amping to
&&<Z<&
played in bi-amping.

Connections

1.

Connect as below using the FRONT terminals and
HEIGHT 1 (Bi-AMP) terminals.

Front R

Front L

Tweeter (treble)

Woofer (bass)

2.

Turn the unit on and set "Speaker Setup" to "Bi-Amp".

1

After pressing RECEIVER, press HOME on the
remote controller.

2

Select "Setup" with the cursors and press ENTER.

3

$<~*~@
"Speaker Settings" - "Front Speakers Type".

4

Select "Bi-Amp" with the cursors.

r

Before bi-amping, be sure to remove the short-
circuit connector that connects the tweeter (treble)
terminal and the woofer (bass) terminal.

r

Use speakers supporting bi-amping only. For
details, refer to the speakers' instruction manual.

Connecting Dipole Speakers

It is possible to use dipole speakers instead of surround
speakers and surround back speakers. A dipole speaker
is bidirectional speaker outputting the same sound in two
directions, for example forward and backward.

a

a

b

b

TV

Connections

An arrow for matching the phases (

¼

) is marked on a

dipole speaker. Place the surround speakers (a) so that
their arrows ( ) point to the TV and the surround back
speakers (b) so that their arrows (

) point to each other.

½

Phase: A waveform position in one cycle (0 to 360 degree) of sine
wave. If the phases do not match due to mistake in speaker distance,
installation angle or positive (+)/negative (–) of wiring, sound image and
sound field may be unclear or hard of listening.

Connecting a Power Amplifier

You can connect a power amplifier to the unit and use the
unit as a pre-amplifier in order to produce a large volume
that cannot be output with the unit only. Connect the
speakers to the power amplifier. For details, refer to the
power amplifier's instruction manual.

Power amplifier

r

Set the unconnected channels to "None" in "Speaker
Configuration".

– After pressing RECEIVER, press HOME on the

remote controller. Select "Setup" with the cursors
<<~*~
- "Speaker Configuration" and set the unconnected
channels to "None".

«
...
53
54
55
56
57
...
»

Summary of Contents for TX-NR1030







































































































Reviews:

No comments

Related manuals for TX-NR1030

Brand: Panasonic Pages: 24

Brand: Xtrend Pages: 65

Brand: Lafayette Pages: 22

Brand: TOP VEHICLE TECH Pages: 8

Brand: Samson Pages: 24

Brand: Onkyo Pages: 20

COMPLETE CONTROL MRX-1

Brand: Universal Remote Control Pages: 27

Brand: CAME Pages: 2

Brand: Boss Audio Systems Pages: 9

Brand: Boss Pages: 21

Sat-light 7320R

Brand: Foxcom Pages: 26

Brand: AFi Pages: 4

Brand: Icom Pages: 44

Brand: PCB Piezotronics Pages: 17

Brand: Icom Pages: 40

MOST-HUR NTV-KIT155

Brand: Nav TV Pages: 6

Brand: Spektrum Pages: 14

Brand: HAMTRONICS Pages: 10

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands