5
EN
3 Get started
Always follow the instructions in this chapter in
sequence.
Power supply
Either AC power or battery can be used as
power supply of this product.
Option 1: AC power
Caution
•
Risk of product damage! Make sure that the power
voltage corresponds to the voltage printed on the back
or underside of the speaker.
•
Risk of electric shock! When you unplug the AC
adapter, always pull the plug from the socket. Never
pull the cord.
• Connect the power adaptor to:
• the
DC IN
socket at the back of the
speaker.
• the wall outlet.
Option 2: Battery power
The speaker can also be powered by the built-
in rechargeable battery.
Note
System
status
Battery status
Power LED
status
On/off
Low power (less
than 10%)
Flashing red
On
Under charging
Flashing white
On
Fully charged
Solid white
Switch on or go to standby
mode
• Press to switch the speaker on.
»
If the speaker is fully charged, the
power indicator turns solid white.
»
If the speaker is being charged, the
power indicator flashes white.
»
If the speaker is in low battery (with
less than 10% power), the power
indicator flashes red.
• To enter standby mode, press briefly.
»
The power indicator is dimmed in
white.
• To switch off when the speaker is on or in
standby mode, press and hold for two
seconds.
»
The power indicator turns off.
Tip
•
In Bluetooth mode, if Bluetooth connection is invalid or
music playback is stopped for 15 minutes, this speaker
switches to standby mode automatically.
•
In AUX IN mode, if the audio-in cable is disconnected
or music playback is stopped for 15 minutes, this
speaker switches to standby mode automatically.
•
Rechargeable battery has a limited number of charge
cycles. The battery life and number of charge cycles
vary by use and settings.
•
It takes you approximately three hours to fully charge
the battery.
To charge the built-in battery:
• Connect to AC power supply.
Summary of Contents for OKAX9
Page 1: ...User manual OKAX9...
