background image

8

EN

5  Other features

Listen to an external device

With this speaker, you can also listen to an 

external audio device such as an MP3 player.

 

Make sure there is no music streaming 

from the connected Bluetooth device (if 

available).

Connect an audio input cable with a 3.5 

mm connector on both ends to

•   the 

AUX IN

 socket on this speaker, 

and

•   the headphone socket on the external 

device.

Play music on the external device (refer to 

its user manual).

 

»

The speaker switches to the AUX IN 

source.

Tip

 

When you start music streaming from a connected 

Bluetooth device, the speaker switches to the Bluetooth 

source automatically.

Play through USB

Note

 

Make sure that the USB device contains playable audio 

content.

  

Make sure there is no music streaming 

from the connected Bluetooth device (if 

available).

Connect a USB charging cable to

•   the 

AUDIO IN 

 socket on this 

speaker, and

•   the USB socket on your mobile phone.

Play music on your mobile phone (refer to 

its user manual).

 

»

The speaker switches to the USB 

source.

Note

 

When you start music streaming from a connected 

Bluetooth device, the speaker switches to the Bluetooth 

source automatically.

Summary of Contents for OKAX9














Reviews: