background image

2

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK). NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.

13.Cleaning – The appliance should be cleaned only as recommended

by the manufacturer.

14.Nonuse Periods – The power cord of the appliance should be

unplugged from the outlet when left unused for a long period of
time.

15.Object and Liquid Entry – Care should be taken so that objects

do not fall and liquids are not spilled into the enclosure through
openings.

16.Damage Requiring Service – The appliance should be serviced by

qualified service personnel when:

A. The power-supply cord or the plug has been damaged; or

B. Objects have fallen, or liquid has been spilled into the

appliance; or

C. The appliance has been exposed to rain; or

D. The appliance does not appear to operate normally or exhibits a

marked change in performance; or

E. The appliance has been dropped, or the enclosure damaged.

17.Servicing – The user should not attempt to service the appliance

beyond that described in the operating instructions. All other
servicing should be referred to qualified service personnel.

1. Read Instructions – All the safety and operating instructions

should be read before the appliance is operated.

2. Retain Instructions – The safety and operating instructions should

be retained for future reference.

3. Heed Warnings – All warnings on the appliance and in the

operating instructions should be adhered to.

4. Follow Instructions – All operating and use instructions should be

followed.

5. Water and Moisture – The appliance should not be used near

water - for example, near a bathtub, washbowl, kitchen sink,
laundry tub, in a wet basement, or near a swimming pool, and the
like.

6. Carts and Stands – The appliance should be used only with a cart

or stand that is recommended by the manufacturer.

6A.An appliance and cart combination

should be moved with care. Quick stops,
excessive force, and uneven surfaces
may cause the appliance and cart
combination to overturn.

Important Safeguards

PORTABLE CART
WARNING

S3125A

7. Wall or Ceiling Mounting – The appliance should be mounted to

a wall or ceiling only as recommended by the manufacturer.

8. Ventilation – The appliance should be situated so that its location

or position does not interfere with its proper ventilation. For
example, the appliance should not be situated on a bed, sofa, rug,
or similar surface that may block the ventilation openings; or if
placed in a built-in installation, such as a bookcase or cabinet that
may impede the flow of air through the ventilation openings, there
should be free space of at least 5 cm (2 in.) and an opening behind
the appliance.

9. Heat – The appliance should be situated away from heat sources

such as radiators, heat registers, stoves, or other appliances
(including amplifiers) that produce heat.

10.Power Sources – The appliance should be connected to a power

supply only of the type described in the operating instructions or as
marked on the appliance.

11.Polarization – If the appliance is provided with a polarized plug

having one blade wider than the other, please read the following
information: The polarization of the plug is a safety feature. The
polarized plug will only fit the outlet one way. If the plug does not
fit fully into the outlet, try reversing it. If there is still trouble, the
user should seek the services of a qualified electrician. Under no
circumstances should the user attempt to defeat the polarization of
the plug.

12.Power-Cord Protection – Power-supply cords should be routed so

that they are not likely to be walked on or pinched by items placed
upon or against them, especially near plugs, convenience
receptacles, and the point where they exit from the appliance.

The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the product.

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

RISQUE DE CHOC ELECTRIQUE

NE PAS 

OUVRIR

AVIS

This label on the rear panel states that:
1. This unit is a CLASS 1 LASER PRODUCT and employs a

laser inside the cabinet.

2. To prevent the laser from being exposed, do not remove the

cover. Refer servicing to qualified personnel.

“CLASS 1 LASER

 PRODUCT ”

Special cautions for MD recorder
This unit contains a semiconductor laser system and is classified
as a “CLASS 1 LASER PRODUCT”. So, to use this model
properly, read this Owner’s Manual carefully. In case of any
trouble, please contact the store where you purchased the unit. To
prevent being exposed to the laser beam, do not try to open the
enclosure.

Summary of Contents for MD-2521

































Reviews: