8
STANDBY / ON
STANDBY
FADE
REV MODE
DOLBY NR
B
C
ALBUM
CD DUBBING
K
-
5 01A
STEREO CASSETTE TAPE DECK
CASSETTE LOADING MECHANISM
L
R
OUTPUT
INPUT
REMOTE
CONTROL
AC OUTLET
AC 230-240 V 50 Hz
UNSWITCHED
100 W MAX.
Connecting to other components (continued)
Connecting the
connectors
If you are using other ONKYO components equipped with
connectors, you can control these
components using the amplifier’s remote controller.
Before connecting
• The amplifier must be connected in the
system hookups for
control operations.
• Each component has two
connectors. There is no difference between these connectors.
• The components may be connected in any order.
• The hookups on the previous page are necessary independently of the
system hookups.
The illustration below is an example of a
hookup. With these hookups, you can operate the CD
Synchro Recording; when recording a tape with this unit from the CD player, you can start recording
automatically (while the unit is in recording standby) at the same time as you play the CD (see “CD
Synchro Recording” on page 14).
For CD Synchro Recording, at least the unit, amplifier, and CD player must be connected with the
connectors.
Note
If you connect the AC power cord (mains lead) to the AC outlet of another component, the component’s
AC power cord (mains lead) must be connected to the wall outlet (the mains) to supply power to the unit.
If the component has a main power switch, it must be set to On.
Connecting the AC power cord (mains lead) to the wall outlet (the mains)
The STANDBY indicator
lights
AC power cord
(mains lead)
Supplied
remote
control cable
remote control
cable (optional)
remote control
cable (optional)
REMOTE
CONTROL
Tuner
Amplifier
This unit
(K-501A)
CD player
Note
An
remote control
cable equipped with a
1/8 in. (3.5mm)
diameter miniature two-
conductor phone plug is
included with this unit
and with every compact
disc player and tuner
that bears the
mark.
1/K-501A(p06~21)_E.65E
10/17/01, 10:16 AM
8