21
Befor
e Using
Connections
Other Information
Operation
5
Press and hold
, then press
or
(to record on the reverse
side) to decide the recording
direction.
The REC indicator around the button and
PLAY indicator light.
The unit is set to recording pause.
6
Press DOLBY NR until the
indicator of the Dolby NR mode
you want to record with lights.
See “Dolby Noise Reduction Systems” on
page 15 for Dolby NR mode information.
The indicators light in the following order:
B
(Dolby B NR)
C
(Dolby C NR)
The indicator goes off.
7
Set the CD player, MD recorder
or CD recorder to start playing
at the point you want to start
recording from.
8
Press
on the CD player, MD
recorder or CD recorder.
To stop recording
Press on the unit. (The CD player, MD recorder
or CD recorder continues playing.)
Note
If you press on the CD player, MD recorder or CD
recorder before pressing on the unit, the unit
makes a blank section of about 5 seconds and
enters recording pause.
Precautions regarding the recording
level
If you are dubbing with the unit connected to
the FR series (FR-X7, FR-V77, FR-V7, FR-V5, FR-
V3, FR-435, FR-155), or a tuner or cassette deck
of the Separate Collection Series, the recording
level will be set lower. (This is the default
setting.)
To set the recording level higher
1 Press STANDBY/ON to return the unit to
standby mode.
2 Press DOLBY NR and
simultaneously.
(The CD DUBBING ALBUM, CD
DUBBING FADE and REC indicators will
light. Setting is completed.)
To return to the default setting level
1 Press STANDBY/ON to return the unit to
standby mode.
2 Press DOLBY NR and
simultaneously.
(The
B
,
C
, and indicators will light.
Setting is completed.)
You can also return to the default recording level
by removing the power plug from the outlet and
then plugging it in again.
Synchro recording from K-501A
to MD-101A or CDR-201A
When you start playback on the K-501A
when the MD-101A or CDR-201A is set to
recording pause, the input source of the R-
801A turns automatically to TAPE and
synchro recording starts from the K-501A to
the MD-101A or CDR-201A.
To adjust the recording level and start
synchro recording
Start playback on the unit and adjust the
recording level by referring to “Analog
recording” in the Instruction Manual of the MD-
101A or CDR-201A.
Then, rewind to the point you want to start
recording from and start playback again on the
unit. Synchro recording starts.
To stop recording
Press on the unit.
or
DOLBY NR
1/K-501A(p06~21)_E.65E
10/19/01, 4:33 PM
21
