background image

17

Befor

e Using

Connections

Other Information

Operation

• When   goes off (One-way mode)

The unit stops after recording the
forwarding side of the tape.

4

Insert a CD into the CD player.

5

Press DOLBY NR until the
indicator of the Dolby NR mode
you want to record with lights.

See “Dolby Noise Reduction Systems” on
page 15 for Dolby NR mode information.
The indicators light in the following order:

B

 (Dolby B NR)  

  

C

 (Dolby C NR)

 

 

The indicator goes off.

 

6

Press CD DUBBING ALBUM for
Album dubbing or CD DUBBING
FADE for Fade out dubbing.

The CD DUBBING ALBUM or CD DUBBING
FADE indicator around the each buttons
lights.

• When CD DUBBING ALBUM or CD

DUBBING FADE is pressed, the unit
adjusts the recording level to its
optimum level and starts to rewind the
tape. To avoid the leader (the
transparent section at both ends of the
tape where no sound can be recorded),
the unit makes a blank section 10
seconds long at the beginning of both
A and B sides. Do not press any button
until the unit or C-701A has completed
this operation.

• The PLAY indicator flashes while the

unit is making the blank section and
lights when it starts recording.

Note

• If the CD or tape is not inserted correctly or all

operations on the unit and C-701A have not
stopped, the CD DUBBING ALBUM or CD
DUBBING FADE indicator flashes and recording
will not begin.

• If a track is too long to fit on one side of the

tape, it will continue to be recorded from side A
onto side B without being erased.

• Fade out may not be completed if the leader is

encountered.

• No sound will be recorded if less than about 30

seconds remains on the end of the tape.

To stop CD dubbing

Press   on the unit or CD player.

K-501A (This unit)

C-701A (CD player)

FADE

ALBUM

CD DUBBING

DOLBY NR

STANDBY / ON

STANDBY

FADE

REV MODE

DOLBY NR

B

C

ALBUM

CD DUBBING

K- 

5 01A

STEREO CASSETTE TAPE DECK

CASSETTE LOADING MECHANISM

CD DUBBING ALBUM/FADE

DOLBY NR

COMPACT DISC PLAYER 

DISPLAY

C -

701A

STANDBY / ON

STANDBY

(Continued on the next page)

FADE

CD DUBBING

ALBUM

ONKYO

CD PLAYER

CD PLAYER

1/K-501A(p06~21)_E.65E

10/17/01, 10:17 AM

17

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for K-501A





























Reviews: