background image

AV Surround Processor

ED-205

AV SURROUND PROCESSOR 

STANDBY/ON

STANDBY

EFFECT

MODE

MASTER VOLUME

MULTI CH INPUT LINE

VIDEO-1/2

ED-205

POWER

OFF

ON

Instruction Manual

Thank you for purchasing the ONKYO AV Surround
Processor.
Please read this manual thoroughly before making
connections and turning on the power.
Following the instructions in this manual will enable you
to obtain optimum performance and listening enjoyment
from your new AV Surround Processor.
Please retain this manual for future reference.

Contents

Before using

Important Safeguards ........................... 2
Precautions ........................................... 3
Features ................................................ 4
Supplied accessories ............................ 4
Before using this unit ........................... 5

Operation

Using the remote controller ............... 11
Using the Surround modes ................. 12
Playing a source ................................. 14

Preparation

Connecting the amplifier and video

equipment ........................................... 6

Connecting equipment with 5.1-

channel audio output .......................... 7

Speaker placement and connection ...... 8
Connecting the 

z

 remote control

cables ................................................ 10

Connecting the power ........................ 10

A few important notes

Troubleshooting ................................. 17
Control positions and names .............. 18
Specifications ..................................... 20

Summary of Contents for ED-205





















Reviews: