Onkyo CBX-500, Instruction Manual

Page: 49 / 60

En-
49
Using the Timers
—Continued
7 If you selected “Every”, use the Up/Down
[

]/[

] buttons to select the day,
“Everyday”, or “Days Set”, and then press
[ENTER].
You can select the following:
If you selected anything other than “Days Set”,
proceed to step 9.
8 If you selected “Days Set”, use the Up/
Down [

]/[

] buttons to select the first day,
and then press [ENTER].
Use the Up/Down [

]/[

] buttons again to
select the last day, and then press [ENTER].
You can select only consecutive days.
9 Use the Up/Down [

]/[

] buttons to specify
the On time, and then press [ENTER].
Note:
• Once the On time has been changed, the Off time is
automatically set to 1 hour later.
10 Use the Up/Down [

]/[

] buttons to spec-
ify the Off time, and then press [ENTER].
11 Use the Up/Down [

]/[

] buttons to spec-
ify the CBX-500/CBX-600UKD’s volume
level, and then press [ENTER].
You can select Lst, 1, 2, 3, and so on, Lst being
the volume level that was set when the
CBX-500/CBX-600UKD was last turned off.
The default setting is 15.
12 Press the [ON/STANDBY] button to set
the CBX-500/CBX-600UKD to Standby.
Notes:
• Be sure to set the CBX-500/CBX-600UKD to
Standby, otherwise the timed operation will not work.
• While a timed operation is in progress, you can cancel
it by pressing the [TIMER] or [SLEEP] button.
To return to step 1 and start timer programming all over
again, press the [MENU] button at any point in this pro-
cedure.
SUN
TUE MON
Days Set Everyday
WED THU
SAT
FRI
TIMER indicator
Number of programmed timer