Onkyo CBX-500, Instruction Manual

Page: 18 / 60

En-
18
Basic Operation
To turn on the CBX-500/CBX-600UKD, press the
[ON/STANDBY] button on the CBX-500/
CBX-600UKD or remote controller. The STANDBY
indicator goes off.
Press the [ON/STANDBY] button again to set the
CBX-500/CBX-600UKD to Standby. The STANDBY
indicator lights up.
Press the VOLUME Up [

] button to increase the vol-
ume or the VOLUME Down [

] button to decrease it.
You can also use the remote controller’s VOLUME [

]/
[

] buttons.
You can select CD, iPod, DAB
*1
, FM, AM, USB
*2
, or
LINE, which can be an external component.
To select the input source, use the remote controller’s
INPUT SELECTOR buttons. On the CBX-500/
CBX-600UKD, press the [INPUT] button repeatedly.
The input sources are selected in the following order.
*1. DAB can be selected only on the CBX-600UKD.
*2. USB can be selected only on the CBX-500 European model.
Turn down the volume, then connect your stereo head-
phones to the PHONES minijack on the rear panel.
You can adjust the volume and mute the sound as nor-
mal.
The speakers output no sound while the headphones are
connected.
ON/STANDBY
INPUT
SELECTOR
VOLUME

/

SNOOZE
INPUT C D USB iPod
ON/STANDBY
INPUT VOLUME
STANDBY indicator (front panel)
PHONES (rear panel)
Turning On the CBX-500/
CBX-600UKD
Adjusting the Volume
Selecting the Input Source
Remote controller CBX-500/CBX-600UKD
Remote controller CBX-500/CBX-600UKD
Using Headphones
DAB iPod
FM LINE
CD
FM iPod
AM LINE
CD
FM iPod
AM USB LINE
CD
• CBX-500 European model
• CBX-500 North American model
• CBX-600UKD
PHONES jack