Onkyo A-9070, Instruction Manual, Page: 39 / 44

39
En
You can specify the function (Route) of the integrated
amplifier by selecting between Normal, Pre, Split, and
Main modes.
■
Operating with the remote controller
■
Operating on the integrated amplifier
Tip
• The default setting is “ NORMAL ”.
Note
• In “ PRE ” mode, SPEAKERS can’t be used.
• In “ SPLIT ” mode, you need to use
PRE OUT
and
MAIN IN
.
• In “ MAIN ” mode, only SPEAKERS and SETUP can be used.
• In “ MAIN ” mode, the audio coming from MAIN IN is output by
speakers with a 32.5 dB amplification.
• The integrated amplifier will end the setup if there is no
operation for 8 seconds.
Setting the Route
1
Press SETUP .
2
Press
!
/
"
repeatedly to select “ROUTE”.
3 Press ENTER .
The route currently selected is displayed.
4
Press # / $ repeatedly to select the route you want
to set.
The selected route flashes.
`
NORMAL :
With this setting, you can use the integrated
amplifier as is.
`
PRE :
With this setting, you can use the integrated
amplifier as a preamplifier (
➔
page 23 ).
`
SPLIT :
With this setting, you can use the integrated
amplifier’s pre-amp and power amp units
separately (
➔
page 24 ).
`
MAIN :
With this setting, you can use the integrated
amplifier as a power amplifier (
➔
page 25 ).
When it is selected, the MAIN IN LED lights.
SETUP
! / " / # / $
ENTER
RETURN
5
Press ENTER .
The selected route flashes rapidly for a few times as
the setting is confirmed.
6
Press RETURN repeatedly to exit the setup.
1 Press SETUP repeatedly to select “ROUTE”.
2
Use the
INPUT
selector to select the route you want
to set.
First, the current setting flashes on the information
display. Then, the selectable routes are displayed
flashing.
3
Press and hold down SETUP .
The selected route flashes rapidly for a few times as
the setting is confirmed.
4
Press SETUP repeatedly to exit the setup.
SETUP
INPUT selector