38
En
When the Auto Standby (ASb) function is activated, the
integrated amplifier will automatically enter Standby
mode if there is no operation for 30 minutes with no audio
signal input.
■
Operating with the remote controller
Once the Auto Standby (ASb) function has been activated,
the integrated amplifier will not automatically turn on
even if it receives a signal. To turn on the integrated
amplifier, press
8
ON/STANDBY
on the integrated
amplifier or
8
on the remote controller manually.
■
Operating on the integrated amplifier
Tip
• Depending on the countries, the default setting is ON (European
models) or OFF (North American models).
Note
• When the Auto Standby (ASb) function is activated, Onkyo
components connected via
u
are automatically turned off
(
➔
page 20
).
• Before entering Standby mode with the Auto Standby (ASb)
function, the message “
ASb
” flashes for 30 seconds on the
information display.
• The integrated amplifier will end the setup if there is no
operation for 8 seconds.
Setting the Auto Standby Function
1
Press
SETUP
.
2
Press
!
/
"
repeatedly to select “ASb”.
3
Press
ENTER
.
The current setting is displayed.
4
Press
#
/
$
to switch between “ASb-ON” and
“ASb-OFF”.
`
ASb-ON
:
Enables Auto Standby.
`
ASb-OFF
:
Disables Auto Standby.
The setting is automatically confirmed.
5
Press
RETURN
repeatedly to exit the setup.
SETUP
!
/
"
/
#
/
$
ENTER
RETURN
1
Press
SETUP
repeatedly to select “ASb”.
2
Use the
INPUT
selector to switch between
“ASb-ON” and “ASb-OFF”.
First, the current setting flashes on the information
display. Then, the setting is switched ON/OFF.
The setting is automatically confirmed.
3
Press
SETUP
repeatedly to exit the setup.
SETUP
INPUT
selector