Onkyo A-9070, Instruction Manual, Page: 35 / 44

35
En
Advanced Operations
Custom Setup
You can perform custom settings using SETUP on the
remote controller or the integrated amplifier. The SETUP
menu allows you to set the following items: NAME ,
SHOW , HPLVL , ASb , ROUTE , and RESET .
Note
• When “ ROUTE ” is set to “ MAIN ”, the “ NAME ”, “ SHOW ”,
“ HPLVL ” and “ ASb ” settings are not available.
• When the “ PHONO ” input is selected, “ NAME ” setting is not
available.
You can change the name of the currently selected input.
Choose a name from the following:
CD , SACD , MD ,
TAPE , TUNER , TV , GAME , PC , DOCK
■
Operating with the remote controller
■
Operating on the integrated amplifier
Tip
• By default, input names are set according to the terminal names.
Note
• If you assign a name that is already used on another input, the
name of that other input will be restored to its default.
• When the “ PHONO ” input is selected, “ NAME ” setting is not
available.
• The integrated amplifier will end the setup if there is no
operation for 8 seconds.
Changing Input Names
1
Press SETUP .
2
Press ! / " repeatedly to select “NAME”.
3
Press
ENTER
.
The name currently assigned to the input flashes.
RST-NO RST-YES
NAME
SHOW
HPLVL
ASb
ROUTE
RESET
CD SACD MD TAPE TUNER
HP -12 HP 0 HP +12
ASb-ON ASb-OFF
DOCK PC GAME TV
PNO OPT CX2
MAIN SPLIT
NORMAL PRE
L1 L2 L3 CX1
SETUP
!
/
"
/
#
/
$
ENTER
RETURN
4
Press
#
/
$
repeatedly to select the name you want
to assign.
The selected name flashes.
5
Press
ENTER
.
The selected name flashes rapidly for a few times as
the setting is confirmed.
6
Press RETURN repeatedly to exit the setup.
1
Press SETUP repeatedly to select “NAME”.
2 Use the INPUT selector to select the name you want
to assign.
First, the currently assigned name flashes on the
information display. Then, the assignable names are
displayed flashing.
3
Press and hold down
SETUP
.
The selected name flashes rapidly for a few times as
the setting is confirmed.
4
Press
SETUP
repeatedly to exit the setup.
SETUP
INPUT selector