25
En
Combined with a preamplifier of your choice, the integrated amplifier can be used as a power amplifier (Main mode).
When it is selected, the
MAIN IN
LED lights. See “Connecting Your Speakers” for connection information
(
➔
page 13
). This is an example of connection using the preamplifier P-3000R.
Using the Integrated Amplifier as a Power Amplifier
Important:
• Always turn the integrated amplifier off before connecting the
MAIN IN
jacks.
• Before setting the integrated amplifier to Main mode, make sure that no component such as a CD player is connected to the
MAIN
IN
jacks, as a direct connection may cause a massive blast sound and damage the integrated amplifier or your speakers.
• This mode can be used with the following limitations:
– The volume level can’t be adjusted.
– Only
SPEAKERS
and
SETUP
can be used.
– Only the
MAIN IN
and
SPEAKERS
terminals can be used.
– The Auto Standby function is not available (
➔
page 38
).
• To use this mode, you need to change the “
ROUTE
” setting (
➔
page 39
).
Preamplifier P-3000R
Integrated Amplifier A-9070