41
En
If you want to control an Onkyo component by pointing the
remote controller directly at it, use the following remote
control codes:
`
32900
:
Onkyo Blu-ray Disc player
`
32901
:
Onkyo HD-DVD player
`
70868
:
Onkyo MD recorder
`
71323
:
Onkyo CD recorder
`
82990
:
Onkyo Dock
Note
• If you connect a cassette tape deck to the
TV/CD
IN
jack, or
connect an RI Dock to the
TV/CD IN
or
VCR/DVR
IN
or
GAME
IN
jacks, for
u
to work properly, you must set the Input
Display accordingly (
➔
20
).
You can reset a
REMOTE MODE
to its default remote
control code.
You can reset the remote controller to its default settings.
By pressing
REMOTE MODE
that’s been programmed
with the remote control code for your component, you can
control Onkyo component as below.
For details on entering a remote control code for a differ-
ent component (
➔
40
).
Controlling a Blu-ray Disc/DVD Player, HD
DVD Player or DVD Recorder
BD/DVD
is preprogrammed with the remote control code
for controlling a component that supports the
p
.
The component must be able to receive remote control
commands via
p
and be connected to the AV
receiver via HDMI.
Resetting REMOTE MODE Buttons
1
While holding down
REMOTE MODE
that you
want to reset, press and hold down
AUDIO
until
the remote indicator lights (about 3 seconds).
2
Within 30 seconds, press
REMOTE MODE
again.
The remote indicator flashes twice, indicating that
the button has been reset.
Each of
REMOTE MODE
is preprogrammed with a
remote control code. When a button is reset, its pre-
programmed code is restored.
Resetting the Remote Controller
1
While holding down
RECEIVER
, press and hold
down
AUDIO
until the remote indicator lights
(about 3 seconds).
2
Within 30 seconds, press
RECEIVER
again.
The remote indicator flashes twice, indicating that
the remote controller has been reset.
Controlling Other Components
Summary of Contents for 29400468
Page 51: ...51 En Memo ...
