34
En
Music Optimizer
The Music Optimizer function enhances the sound quality
of compressed music files. Use it with music files that use
“lossy” compression, such as MP3.
■
M.Optimizer
`
Off
:
Music Optimizer off.
`
On
:
Music Optimizer on.
Note
• The Music Optimizer function only works with PCM digital
audio input signals with a sampling rate below 48 kHz and ana-
log audio input signals. The Music Optimizer is disabled when
the Direct listening mode is selected.
• The setting is stored individually for each input selector.
• The
M.Opt
indicator will light (
➔
8
).
• Alternatively, you can use the AV receiver’s
MUSIC OPTI-
MIZER
.
CinemaFILTER
With the CinemaFILTER, you can soften overly bright
movie soundtracks, which are typically mixed for repro-
duction in a movie theater.
CinemaFILTER can be used with the following listening
modes: Dolby Digital, Dolby Digital Plus, Dolby TrueHD,
Dolby Pro Logic II Movie, Multichannel, DTS, DTS
Neo:6 Cinema, DTS 96/24, DTS-HD High Resolution,
DTS-HD Master and DTS Express.
■
Cinema Fltr
`
Off
:
CinemaFILTER off.
`
On
:
CinemaFILTER on.
Note
• The CinemaFILTER may not work when used with certain input
sources.
Audio Selector
You can set priorities of audio output when there are both
digital and analog inputs.
■
AudioSel
`
ARC
:
The audio signal from your TV tuner can be sent to
the
HDMI OUT
of the AV receiver.
*1
With this selection the TV’s audio can be automati-
cally selected as a priority among other assignments.
`
HDMI
:
This can be selected when
HDMI IN
has been
assigned as an input source. If both HDMI (
HDMI
IN
) and digital audio inputs (
COAXIAL IN
or
OPTI-
CAL IN
) have been assigned, HDMI input is auto-
matically selected as a priority.
`
COAX
:
This can be selected when
COAXIAL IN
has been
assigned as an input source. If both coaxial and opti-
cal inputs have been assigned, coaxial input is auto-
matically selected as a priority.
`
OPT
:
This can be selected when
OPTICAL IN
has been
assigned as an input source.
`
Analog
:
The AV receiver always outputs analog signals.
Note
• The setting is stored individually for each input selector.
• This setting can be made only for the input source that is
assigned as
HDMI IN
,
COAXIAL IN
, or
OPTICAL IN
. If both
HDMI (
HDMI IN
) and digital audio inputs (
COAXIAL IN
or
OPTICAL IN
) are assigned, HDMI input will be selected as a
priority by setting to “
ARC
” (
➔
32
). To select the digital audio
input, see “Digital Audio (Digital Audio Input)” (
➔
28
).
*1
You can select “
ARC
” if you select the
TV/CD
input selector.
But you cannot select it if you’ve selected “
Off
” in the “
Audio
Return Ch
” setting (
➔
32
).
A/V Sync
When using progressive scanning on your Blu-ray Disc/
DVD player, you may find that the picture and sound are
out of sync. With this setting, you can correct this by
delaying the audio signals.
■
A/V Sync
`
0 ms
to
100 ms
in 10 ms steps
Note
• A/V Sync is disabled when the Direct listening mode is used
with an analog input source.
• The setting is stored individually for each input selector.
Summary of Contents for 29400468
Page 51: ...51 En Memo ...