23
≫
≫
≫
≫
≫
≫
2.1 Channel System (Bi-wiring the Speakers)
a
You can connect speakers that support bi-wiring to this unit. Connect the treble and bass correctly. Be sure to remove
the jumper bar connecting between the woofer jacks and tweeter jacks of the Bi-wiring supported speakers. Refer to the
instruction manual of your speakers as well.
• As shown on the illustration, the wiring terminals of SPEAKERS B are connected to the tweeter and SPEAKERS A are
connected to the woofer. However, wiring them the other way around is also possible.
"Speaker Setup" settings during
Initial Setup (
Speaker Setup
Specifies whether the powered subwoofer is connected or not.
Next
< >
Speaker Impedance 6ohms or above
Subwoofer
Speaker B
Yes
Bi-Wiring
Zone 2 Lineout
Zone 2
• Subwoofer:
Yes
(Select "No" when not using a
Subwoofer)
•
Speaker B:
Bi-Wiring
•
Zone 2 Lineout/(Preout):
Any
value
(
•
Speaker Impedance:
4 ohms
:
When any of the
connected speakers have 4
Ω or more to less than 6 Ω
impedance.
6 ohms or above
:
When the
connected speakers all have 6
Ω or more impedance.
a: 22° to 30°
1,2 Front Speakers
3 Powered Subwoofer
For high-
frequency
For low-
frequency