![background image](http://html1.mh-extra.com/html/onkyo/243989/243989_instruction-manual_1637972022.webp)
22
≫
≫
≫
≫
≫
≫
2.1 Channel System (SPEAKERS A+B)
Speakers B
a
*
*
Along with the 2.1 Channel System (SPEAKERS A) (
), you can connect one more set of front speakers to use as
a Speaker B System.
When outputting audio simultaneously from 2 speaker systems
Connect speakers with an impedance of 8 Ω to 16 Ω.
When switching to either A or B for audio output
Connect speakers with an impedance of 4 Ω to 16 Ω.
• Press SPEAKER A/B on the remote controller or the main unit to switch the audio output. The selection changes in the
order SPEAKER A, SPEAKER B, SPEAKER A+B with each press.
• When only SPEAKER B is outputting audio, there will be no audio output from the powered subwoofer.
"Speaker Setup" settings during
Initial Setup (
)
Speaker Setup
Specifies whether the powered subwoofer is connected or not.
Next
< >
Speaker Impedance 6ohms or above
Subwoofer
Speaker B
Yes
A / B
Zone 2 Lineout
Zone 2
• Subwoofer:
Yes
(Select "No" when not using a
Subwoofer)
•
Speaker B:
A/B
•
Zone 2 Lineout/(Preout):
Any
value
(
•
Speaker Impedance:
4 ohms
:
When switching A/B
for audio output, at least one
of the connected speakers
have 4 Ω or more to less than
6 Ω impedance. Also when
outputting audio simultaneously
from 2 speaker systems.
6 ohms or above
:
When
switching A/B for audio output,
the connected speakers all have
6 Ω or more impedance.
a: 22° to 30°
1,2 Front Speakers
3 Powered Subwoofer
*: Speakers B