![background image](http://html1.mh-extra.com/html/onkyo/243989/243989_instruction-manual_1637972108.webp)
108
≫
≫
≫
≫
≫
≫
Noise can be heard
• Using cable ties to bundle audio pin cables, power cords, speaker cables, etc. may degrade the audio performance. Do not bundle the cords.
•
An audio cable may be picking up interference. Change the position of the cables.
The beginning of audio received by an HDMI IN cannot be heard
• Since it takes longer to identify the format of an HDMI signal than it does for other digital audio signals, audio output may not start immediately.
Sound suddenly reduces
• When using the unit for extended periods with the temperature inside the unit exceeding a certain temperature, the volume may be reduced
automatically to protect the circuits.
Sound suddenly changes
• When "InteliVolume" is set, the volume is set for each input selector. Check "4. Source" - "InteliVolume" on the Setup menu (
Cannot select Pure Audio mode
• The Pure Audio mode cannot be selected when the Multi-zone function is on.
Video
• Confirm that the connection between the output jack on the connected device and the input jack on this unit is correct.
• Make sure that none of the connecting cables are bent, twisted, or damaged.
• When the TV image is blurry or unclear, the power cord or connection cables of the unit may have interfered. In such a case, keep distance
between TV antenna cable and cables of the unit.
• Check the switching of the input screen on the monitor side such as a TV.
Check the following if the problem persists after you have confirmed the above.
No image appears
• Change the input selector on this unit to the position of the jack to which the player is connected.