![background image](http://html.mh-extra.com/html/onix/pmp-7200/pmp-7200_instruction-manual_1636219017.webp)
Customer Helpline: 1300 886 649 (AU) | 0800 836 761 (NZ)
17
3. Auto Scan
To search for programs automatically based on the area you set.
4. Manual Scan
To search for programs of a specified frequency.
NOTE:
If it displays “No program information” after scanning, please check
if the antenna is pulled out, and if the place you located have strong
signals.
5. Area Setting
To set the area you are locating before search for programs.
Using USB disk
1. USB display mode
The player is with USB2.0 high speed jack, and the transfer speed reaches
to 3M/S. Works as a standard removable disk, it supports Window2000 and
above system and dose not need any driver. After connecting with the PC,
the display shows the connecting mode.
2. Charging display mode
The play will be power off automatically if there in no enough battery
capacity. You may charge the player with the enclosed charger. It displays the
charging icon while charging. And after finished the charging, the battery
icon is full.
System Upgrade
Copy the firmware “XXXXXX.RKW” into the FLASH, and then select the file in the
Explorer. Press “MENU” button, a interface appears. Select “Yes” and then start
upgrading.
NOTE:
make sure the power is not cut during an upgrade.
Operating Instructions