22
Pic. 3
―
8 Initial Page of OPN -815/825
3.3 Installation with IP Sharing Device (Router)
1) After checking Video in ‘
1. Installation and Video Check
’,
then go to the next step.
2) Connect OPN -815/825 and PC with LAN Cable (Cross Cable).
3)
Cable Connection and Network Setting should be done same as per ‘
1. Installation and Video
Check
’.
4) Go to Network Setting Page of Administrator’s Page as per 4), 5), 6), 7) of ‘
Static IP Setup
’.
5) Click ‘Static IP Address’ in ‘IP Setting’ of [3-9], and input IP Address, Subnet Mask, Default Gateway
according to Network environment to connected OPN -815/825 to.
6) For setting of ‘DNS Server’, input DNS Address to fit with Network Environment to set.
(Default Address of OPN -815/825 is DNS Address of ‘KTF’,’Hanaro Communication’). Use
DNS value normally set in PC.
7) DNS Address should be input surely. In case OPN -815/825 is installed under IP Sharing Device,
input local IP of Router in 2
nd
DNS Server Address.
8) In case of installation without IP sharing device under Static IP, tick on ‘Enable’ of ‘Direct Connect’.
The ‘Direct Connect’ option makes direct connection to IP set on
Video connection through Web Viewer. (
But not tick ‘Enable' in case of installation under IP Sharing
Device.
)
9) Click ‘Save’ Button of [3-9] to save the set value.