![background image](http://html.mh-extra.com/html/onix/opn-815/opn-815_user-manual_1636216020.webp)
20
Pic. 3
―
6 IP Change loading Page
15) Remove LAN Cable (Cross Cable) connected between OPN -815/825 and PC.
16) Connect OPN -815/825 to Network with LAN Cable (Straight Cable).
17) Connect PC to Network with LAN Cable (Straight Cable)..
18) Set up IP Address, Subnet Mask and Gate way of PC according to Network environment.
19) Check
9
Run Web Browser on PC, input IP address set in OPN -815/825 onto URL and click ‘Enter’,
9
Check if IP Setting is correct or not, referring to ‘
Video Check
’
9
In case Video is seen, OPN -815/825 has been correctly set up.
9
In case Video is not seen, check whether there may be confliction of IP in Network, and re-
check the set value of Network environment of OPN -815/825, and Network environment of
User’s PC.
3.2.2 Dynamic IP Setup
9
Do not set up Dynamic IP in OPN -815/825 except direct connection of Cable Modem
supporting Dynamic IP with OPN -815/825.
9
Reset, in case IP has not been allocated to OPN -815/825 in Dynamic IP Setting, to go to
Initial Value and try again.
9
1) After checking Video in ‘
Video Check
’, then go to the next step.
2) Connect OPN -815/825 and LAN Cable (Cross Cable)
3)
Cable Connection and Network Setting should be done same as per‘
1. Installation and Video
Check
’.
4) Go to Network Setting Page of Administrator’s Page as per 4), 5), 6), 7) of ‘
Static IP Setup
’.