![background image](http://html1.mh-extra.com/html/onix/ip360ir3m/ip360ir3m_user-manual_1636223028.webp)
User Manual of Network Fisheye Camera
28
No. which is not occupied.
Server Port:
The default server port number is 8000, and it can be changed to any
port No. ranges from 2000 to 65535.
3. Click
Save
to save the settings.
Note
:
A reboot is required for the settings to take effect.
5.3.3
Configuring PPPoE Settings
Steps:
1. Enter the PPPoE Settings interface:
Configuration >Advanced Configuration >
Network > PPPoE
Figure 5-8
PPPoE Settings
2. Check the
Enable
PPPoE
checkbox to enable this feature.
3. Enter
User Name
,
Password
, and
Confirm
password
for PPPoE access.
Note:
The User Name and Password should be assigned by your ISP.
4. Click
Save
to save and exit the interface.
Note
:
A reboot is required for the settings to take effect.
5.3.4
Configuring DDNS Settings
Purpose:
If your camera is set to use PPPoE as its default network connection, you can use the
Dynamic DNS (DDNS) for network access.
Before you start
:
Registration on the DDNS server is required before configuring the DDNS settings of