User Manual of Network Fisheye Camera
24
5.2
Configuring Time Settings
Purpose:
You can follow the instructions in this section to configure the time synchronization
and DST settings.
Steps:
1. Enter the Time Settings interface:
Configuration > Basic Configuration >
System > Time Settings
Or
Configuration > Advanced Configuration >
System > Time Settings
Figure 5-2
Time Settings
z
Select the Time Zone.
Select the Time Zone of your location from the drop-down menu.
Synchronizing Time by NTP Server.
(1)
Check the checkbox to enable the
NTP
function.
(2)
Configure the following settings:
Server Address:
IP address of NTP server.
NTP Port:
Port of NTP server.
Interval:
The time interval between the two synchronizing actions with NTP
server.
