![background image](http://html1.mh-extra.com/html/onix/ip360ir3m/ip360ir3m_user-manual_1636223064.webp)
User Manual of Network Fisheye Camera
64
6.3
Configuring Snapshot Settings
Purpose:
You can configure the scheduled snapshot and event-triggered snapshot. The captured
picture can be stored in the SD card (if supported) or the netHDD (For detailed
information about netHDD, please refer to
Section 6.1 Configuring NAS Settings
).
You can also upload the captured pictures to a FTP server.
Basic Settings
Steps:
1.
Enter the Snapshot Settings interface:
Configuration > Advanced Configuration > Storage > Snapshot
2.
Check the
Enable Timing Snapshot
checkbox to enable continuous snapshot.
Check the
Enable Event-triggered Snapshot
checkbox to check event-triggered
snapshot.
3.
Select the quality of the snapshot.
4.
Set the time interval between two snapshots.
5.
Click
Save
to save the settings.
Uploading to FTP
You can follow below configuration instructions to upload the snapshots to FTP.
z
Upload continuous snapshots to FTP
Steps:
1)
Configure the FTP settings and check
Upload Picture
checkbox in FTP Settings
interface. Please refer to
Section 5.3.11 Configuring FTP Settings
for more
details to configure FTP parameters.
2)
Check the
Enable Timing Snapshot
checkbox.
z
Upload event-triggered snapshots to FTP
Steps:
1)
Configure the FTP settings and check
Upload Picture
checkbox in FTP Settings
interface. Please refer to
Section 5.3.11 Configuring FTP Settings
for more
details to configure FTP parameters.