onga Dominator 11557, Owner'S Manual

Page: 7 / 9

12
Ref Description Qty
1 Pump body 1.00
9 Diffuser # of Stages
13 Diffuser cap # of Stages
21 Impeller # of Stages
24 Mecanical seal 1.00
26 Flange ( Mechanical seal holder ) 1.00
29 Bearing 1.00
31 Snap ring ( Pump side ) 1.00
32 Shaft ( Including rotor ) 1.00
33 Case ( Including stator ) 1.00
36 Ring 1.00
46 Capacitor Holder 1.00
47 Capacitor 1.00
60 Screw ( Ground ) 1.00
61 Washer ( Ground screw toothed ) 1.00
62 Washer ( Ground screw plain ) 1.00
66 Screw (Cable gland) 2.00
79 Gasket ( Pump body ) 1.00
120 Filter 1.00
123 Ring ( Seal ) 1.00
126 Lubricant 1.00
127 O-Ring ( Lower bearing fl ange ) 1.00
128 Flange ( Lower bearing holder ) 1.00
129 Stator ( Single phase wound ) 1.00
130 Motor body 1.00
133 Bushing ( Ceramic ) 1.00
135 Flange ( Upper bearing holder ) 1.00
139 Screw ( Inspection ) 2.00
144 Cable ( Power ~ single phase w/grommet) 1.00
145 Base ( Filter ) 1.00
149 Flange ( Suction ) 1.00
159 O-Ring ( Cover ) 4.00
166 Washer ( Seal compression ) 1.00
167 Check Valve 1.00
177 Cover 1.00
230 Bearing ( Bronze ) 1.00
231 Snap ring 1.00
233 Snap ring 1.00
234 Ring ( Anti-wear ) # of stages minus 1
235 Snap ring ( Start up ) 1.00
240 Screw ( Wire cover ) 2.00
259 O-Ring ( Vent valve ) 1.00
358 Flange ( Cording clamp ) 1.00
11
7. Exploded diagram - Internal parts