Onfloor Striker 2010, Operator'S Manual

Page: 16 / 76

OPERATION
14
1. Recharge batteries in a well ventilated area.
2. Park machine on level surface, turn key off.
3. Before charging, check water level in each
battery cell.
(Ref. BATTERY MAINTENANCE)
4. When charging, use recovery tank support
stand to ensure ventilation during charging.
5. Connect charger’s AC power supply cord to a
properly grounded receptacle.
6. Connect charger’s Red 24 VDC plug to the
machines battery receptacle found above
squeegee lift handle.
7. The charger will automatically begin charging
and turn off when fully charged.
WARNING: Fire OR Explosion Hazard.
Batteries Emit Hydrogen Gas. Keep Sparks
And Flames Away. Charge Batteries With
Hood Open.
NOTE:
Machine will not operate while connected
to battery charger.
ATTENTION: Do not disconnect charger cord
from machine receptacle while charger is
operating. If charging must be interrupted,
disconnect charger from wall outlet first.
MAINTENANCE
WARNING: Electical Hazard. Disconnect
Battery Cables Before Machine Maintenance.
DAILY MAINTENANCE
For optimal machine performance, follow regularly
scheduled maintenance procedures.
1. Drain and clean the recovery tank.
2. Remove and clean float shut off screen located
in the recovery tank.
3. Drain solution tank and rinse with hot water, 60º
(140ºF) max temperature.