Onfloor Striker 2010, Operator'S Manual

Page: 10 / 76

OPERATION
8
BRUSH AND PAD SELECTION
Non-scuff polypropylene scrub brush
- A
softer brush intended for use in general purpose
scrubbing for lightly lifting compacted soilage
without scuffing high-gloss coated floors.
Nylon scrub brush
- Recommended for
scrubbing coated floors. Cleans without
scuffing surface.
Super abrasive bristle scrub brush
- Nylon
fiber impregnated with abrasive grit for
removing heavy stains and soilage. Strong
action works well on build up, grease,
and/or tire marks.
Heavy duty stripping pad
- Intended for
stripping floors. Pad aggressively cuts through
old, heavy, floor finishes in preparation for
re-coating.
Stripping pad
- Intended for stripping floors.
Quickly and easily cuts through old finish to
prepare the floor for re-coating.
Scrubbing pad
- Intended for scrubbing
floors. Removes dirt, spills and scuffs,
leaving a clean surface ready for re-coating.
Buffing pad - Intended for buffing floors.
Quickly cleans and removes scuff marks
while polishing the floor to a high gloss.
Polishing pad
- Intended for polishing floors.
Maintains a high gloss. Use for buffing very
soft finishes and lower traffic areas, or use
for polishing soft waxes on wood floors.
Use the correct brush type for your cleaning environment.
Choose from the following brushes and pads.