Oneida Air Systems Supercell XSK000030, Owner'S Manual

Page: 23 / 34

FIG. 30
G20
G20
I
oneida-air.com 21
Assembly Instructions (Continued)
29
Attach the other end of the Vinyl Tubing (G16)
onto the Nylon Elbow (G17A) installed on the
lower section of the Drum (L). Push the Vinyl
Tubing onto the fitting so that all the barbs are
covered [FIG. 29].
30
Connect the Supercell to your tools or
ductwork using the Vacuum Pressure-Rated
Hose (I). Secure the hose in place using the
Turn-Key Band Clamps (G20) at either end
[FIG. 30].
Installation is complete!
ONLY USE VACUUM PRESSURE RATED FLEX-HOSE AND DUCT WITH THE SUPERCELL DUST COLLECTOR.
UNDER THE SYSTEM'S HIGH SUCTION, STANDARD HOSE/PIPE MAY COLLAPSE CAUSING AFFIXED TOOLS TO
BE PULLED TOWARDS THE SYSTEM, POTENTIALLY CAUSING DAMAGE AND/OR INJURY.
FIG. 29
G16
G17A