Oneida Air Systems
10
Assembly Instructions (Continued)
FIG. 7
FIG. 6
Align the bucket to your wet/dry vacuum to locate the
best placement for the Foam Spacer Block (G) [FIG. 6]. A
Foam Block Template is provided on page 29 to assist
when marking where the Foam Spacer Block will attach to
your vacuum and Bucket. The Foam Spacer Block can be
trimmed or cut to best conform to your vacuum’s shape and
size.
Note: Attach the Bucket to the side of your vacuum opposite
its inlet.
5
Mark the Foam Spacer Block (G), Bucket (F), and wet/
dry vacuum. Carefully drill two 1/4" holes at all marked
locations [FIG 7].
Note: If you decide to detach the Bucket from your wet/dry
vacuum; seal the holes with a bolt, washer, nut and silicone.
6
