Oneida Air Systems
8
Assembly Instructions (Continued)
Mark the bottom of your Bucket (F) as shown in [FIG. 4] at
least 1" from the outside edge. Using a 5/16" drill bit, drill
into the Bucket at all four marked locations.
Note: The fourth hole is to relieve vacuum pressure inside the
side-car Bucket.
3
The Deluxe Kit includes two Buckets (F): One Bucket
is used to collect the debris and the second Bucket is
used as a sidecar connected to your wet/ dry vacuum to
make the kit portable [FIG. 3]. If you choose not to use
the second Bucket as a sidecar and instead use it as an
additional debris bucket, continue to Step 9 on page
13.
Oneida Air
Systems Logo
Blank
WARNING!
Safety
Instructions
X
X
X
X
FIG. 3
FIG. 4
