13
oneida-air.com
FIG. 9
Assembly Instructions (Continued)
9
Attach the Dual Filter Plate (L) to the stand
using the stand's pre-installed hardware as
shown in [FIG. 9].
Note: Hardware should be finger tightened first
for ease of assembly when securing Filter Plate
Assembly.
10
Cut the 7" Diameter Flex Hose (K) in half
using a razor knife and diagonal cutter to cut
through the clear lining and reinforcing wire.
[FIG. 10a].
Attach both pieces of 7" Diameter Flex Hose
to the 8x7x7 Pants Wye (I), and secure them
in place with the 6-8" Hose Clamps (J). Repeat
the process to attach the opposite end of each
Hose onto the openings on the Dual Filter
Plate (L) [FIG. 10b].
Note: The hose is a snug fit. Pull ends up little by
little to work the hose onto the Pants Wye and
Dual Filter Plate. Pliers can be used to grab the
reinforcing wire and aid in pulling the hose
over the opening.
Bolts
Washers
Whiz-Lock Nuts
L
Cut
Here
FIG. 10b
FIG. 10a
Summary of Contents for 7247180
Page 2: ......
Page 27: ...25 oneida air com Notes...