9
oneida-air.com
Assembly Instructions (Continued)
FIG. 3
FIG. 2a
FIG. 2b
FIG. 2d
FIG. 2c
Top View
2
Apply Gasket (O1) making sure that there is
no gap where the ends meet:
a. Apply to the top flange of the Cone (D)
inside the bolt holes [FIG. 2a].
b. Apply to the top rim of the Barrel (C)
outside of the bolt holes [FIG. 2b].
c. Apply to the Fan Housing's (B) outlet
inside the bolt holes [FIG. 2c].
d. Apply to the top of the Fan Housing (B)
outside the bolt holes [FIG. 2d].
Note: Dust collection systems cannot operate
effectively if there isn’t a complete seal. There
must be NO air leaks.
3
Lift the Cone (D) onto the Stand (P), making
sure to align the Cone’s flange holes with those
on the Stand [FIG 3].
Top View
Summary of Contents for 7247180
Page 2: ......
Page 27: ...25 oneida air com Notes...
