FOREDOM
®
Foredom Electric Company
16 Stony Hill Road, Bethel, CT 06801
Tel.: (203) 792-8622
•
Fax: (203) 796-7861
Email: [email protected]
www.foredom.net
F-1037 3/19 n
Printed in USA
LIMITED WARRANTY
Warranty period is 2 years for the MADC20 Dust
Collector. Blackstone Industries, LLC d/b/a The
Foredom Electric Company warrants, to the original
purchaser only, that its products will be free from
defects in material or workmanship for the applica-
ble period of time indicated above following the
purchase date. During the warranty period, the
defective product will be repaired or replaced
without charge or, at our sole option, the purchase
price will be refunded. This warranty does not cover
damage caused in transit or by accident, misuse or
ordinary wear.
ALL IMPLIED WARRANTIES INCLUDING, WITHOUT
LIMITATION, IMPLIED WARRANTIES OF FITNESS
FOR A PARTICULAR PURPOSE AND MERCHANT-
ABILITY, ARE LIMITED IN DURATION TO THE
APPLICABLE WARRANTY PERIOD. IN NO EVENT
WILL WE BE LIABLE FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES. Some states do not
allow limitations on how long an implied warranty
lasts or the exclusion or limitation of incidental or
consequential damages, so the above limitations or
exclusion may not apply to you.
At our sole option, repair, replacement or refund
will be made if the product is returned postage
prepaid to:
Foredom Electric Company, 16 Stony Hill Road
Bethel, Connecticut 06801
All warranty repairs must be done at our factory at
the above address. We will not pay any shipping or
transportation charges.
This warranty gives you specific legal rights, and
you may also have other rights which vary from
state to state.
Repair Services
Authorized repair service is available at the
Foredom factory in Bethel, CT. Send items for
repair to the factory marked:
“Attention: Repair Depart ment”
Foredom Electric Company
16 Stony Hill Road, Bethel, CT 06801
Enclose the item(s), a packing list, a description
of the problem or repairs needed, daytime phone
number and email address. Estimates of repair
cost will be made upon request.
E.
Remove the screws
holding each motor
brush assembly from the
motor.
F.
Slide the old motor
brushes out and insert
new ones.
Reconnect the electrical
connectors to both
motor brushes and
tighten the screws that
hold each motor brush
in place.
Slide the motor
back into the housing,
secure the motor to its
mounting bracket and
replace the front panel
making sure you have
a good fit and that
no wires are being
pinched.
Specifications
Weight 30
1
⁄
2
lb
Height 19
1
⁄
2
″
, Width 15
1
⁄
4
″
, Length 15
1
⁄
4
″
Cyclone Height 16
1
⁄
2
″
, Width 7
1
⁄
2
″
Shipping Dimensions: 20
1
⁄
4
″
x 20
3
⁄
4
″
x 23
1
⁄
4
″
Hose 2
1
⁄
4
″
Diameter, 5
′
Length
115 Volt / 6.5 Amp
750 Watt / 115 CFM / 52 dbA
Filter has a 16 Merv Rating, 99.8% of
all particles 0.3 micron and larger
Additional & Maintenance Parts
•
Top Connector with two 90˚ elbow fittings MADCVH-2
•
5
′
Vacuum Hose Assembly with one
coupling MADCVH-5
•
Motor Brush pair MP810P
•
HEPA Filter MADC205
•
Canister Filter MADC208
•
Clear Dust Collection Bowl MA831
•
8 Amp Fuse CP804
•
Casters (4) MA824
•
Remote Switch Cable (9
′
Cord) MA822
•
Remote Cord for MALC15 MA820
•
Power Cord CP10831
•
Exhaust Deflector MADC209
Owner’s Manual
FOREDOM
®
MADC20
Dust
Collector
For Your Own Safety
•
Please read this Manual before operating your Foredom Dust Collector.
•
Always wear eye protection while using power tools.
•
NEVER use the Dust Collector to pick up flammable liquids or any liquids and
do not use near flammable or combustible liquids as fire or explosion can occur.
•
ALWAYS operate the Dust Collector with a filter collection bag properly in
place that has been inspected for any damages. Sawdust and other debris can
cause inhalation problems and are potentially fire and explosion hazards.
•
ALWAYS disconnect the Dust Collector from a power source when removing or
replacing filter bags or doing any sort of maintenance.
Motor
Brush
Please retain your proof of purchase
for warranty repairs.
