Introduction
This heavy-duty 35 gallon dust collection drum
bag holder is zinc plated and comes with sturdy
rubber handles for ease of use.
Inventory
After all the parts have been removed from the
box, use the
Parts Breakdown
on
Page 2
to
inventory the parts.
MODEL H8173
35 Gallon Dust
Collection Bag Holder
INSTRUCTION SHEET
If you need help with your new bag holder, call our
Tech Support at: (570) 546-9663.
COPYRIGHT © MARCH, 2007. BY GRIZZLY INDUSTRIAL, INC., REVISED OCTOBER, 2007
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#TS9105 PRINTED IN TAIWAN
The metal plates of this bag holder have
sharp edges. Use gloves to protect your
hands during assembly to avoid cutting
yourself.
Assembly
1.
Connect the four metal plates together using
the (16) #10-20 x
3
⁄
8
" Phillips head screws
and the (16) #10-20 hex nuts (see
Figure
1
).
2.
Install the rubber handles on the inside of the
bag holder with the (4)
1
⁄
4
"-20 x
5
⁄
8
" hex bolts,
the (8)
1
⁄
4
" fender washers, and the (4)
1
⁄
4
"-20
hex nuts.
Figure 1.
Model H8173 assembled.
Use the Model H8173 bag holder with the dust
collection bag as shown in
Figure 2
.
Figure 2.
Model H8173 inserted into 35 gallon
dust collection drum with collection bag.
