14
Assembly
Step 1
Assemble the wire rack and the
metal tube.
Insert each end of the wire rack (22)
to the relevant hole of the metal tube
(21 ).
Step 2
Assemble legs.
Install the short leg (14) to one side
of the metal tubes using 2pcs screws
(F), install the long leg (15) to another
side of the metal tubes (21) using 2pcs
screws (F).
Step 3
Installing wheels to the legs
Insert the axle (19) through the holes
of the short leg (14), and attach wheels
(20) to both sides of the axle, attach
washer (K) to two ends of the axle, us-
ing 2pcs M8 ( J ) nuts to tighten.
Do not fully tighten the screws too tight before completely assembling your barbecue.
