To get the main information for MDVR working easier, on QUAD view, the user can please just press
【
ENTER
】
on remote control to show below screen. This screen will show all the important working information for the MDVR
including sensor, 3G/GPS/WIFI signal and connection, firmware version, MCU version, SIM dialed up status etc
…
But the precondition for this OSD is the user must setup the OSD overlay menu to select which information the
user want to display.
3.2.2.3
CAMERA SETTINGS
To setup the parameters for camera related with recording for each channel.
ENABLE:
Enable the record function.
NAME:
The name of the channel. For example, if the user setup the name for CH1 is ABC, the user can see
ABC three letters display on the video from channel 1
AUDIO:
Active the audio record function
LIVE:
to enable the channel to display the image in the monitor output.
Page 34 of 59
