3.2.1.10 GEO-FENCING
GEO-FENCING SWITCH:
this is the switch to enable GEO-Fencing function. This switch is only for MDVR
terminal.
To finish the setting for GEO-FENSE, the user need to setup the CMS software
as well. For more details, please refer to the manual for CMS.
Remark
: Geo-fencing means the user can setup a special virtual area for the vehicle, when the vehicle enters into
or out of this area, the MDVR system will trigger the alarm.
For more details please check the CMS manual.
Page 29 of 59
EXPORT and IMPORT:
The function can be used in WCMS only (not standard CMS from
OneTech
). The user
can setup the GEO-fencing in the WCMS side and this configuration file will be sent to
the MDVR system by wireless network. The user can EXPORT this configuration file to
the thumb driver and IMPORT this file to another MDVR system.
