3.2.1 SYSTEM
3.2.1.1
DATE/TIME
DATE FORMAT:
Press ENTRE on remote control to select different format MM/DD/YYYY,
DD/MM/YYYY,YYYY-MM-DD
TIME FORMAT:
12H or 24H, Press ENTER to select different format.
TIME SYNC SOURCE:
The system can adjust the time in different zone via
either “GPS” or “NTP”.
A:
While selecting the “GPS”, the MDVR device must have GPS connection (Should have GPS
module and antenna) and GPS must receive the signal. When the system time arrives the sync
time, MDVR unit will synchronize with GPS time once.
B:
While selecting the “NTP” (Network Time Protocol), the device must have network access
connection and assign the NTP IP location
.
TIME ZONE:
Please choose the correct time zone for MDVR system.
SYNC TIME:
This is the time when the unit will sync the system time every day. The method depends on the
setting on the TIME SYNC SOURCE option:
NTP SERVER IP:
Input the server IP which can support NTP protocol, in order to allow the system can have time
synchronization through the network. [Example: "192.43.244.18", "129.6.15.28",
"211.22.55.116", "194.88.2.60"]
DST:
Daylight Time. Only when it set on, the following option will available.
DST MODE:
There are two modes: AUTO/MANUAL. Auto: According to the international DST, i.e.: valid only
between 2AM on Second Sun in March and 2AM on First Sun in NOV.
Page 18 of 59
