Place safety key in right position, press star and set speed into 1km/h put your hand on the middle
part of the board and keep in the position for several seconds then move from left to the right to
spread the grease under the belt
Running belt tension adjustment
•
When you run, you may push off harder with one foot than with another. The severity of the
deflection depends on the amount of force4 that one foot exerts in the relation to the other.
•
This deflection can cause the belt to move off- centre. This deflection is normal and the
running belt will centre when no body is on the running belt.
•
If the running belt remains consistently off-centre, you will need to centre the running belt
manually.
•
Start the treadmill without anyone on the running belt, press FAST-key until speed reached
6kph.
•
Observe whether the running belt is toward the right or left side of the deck.
•
If toward the left side of the deck, using wrench, turn the left adjustment bolt clockwise 1/4
turn and the left adjustment bolt counter clockwise 1/4.
•
If toward the right side of the deck, turn the right adjustment bolt clockwise 1/4 turn and the
left adjustment bolt counter clockwise 1/4.
•
If the belt is still not centre, repeat the above step until the running belt is on centre.
•
After the belt is centre, increase the speed to 16kph and verify that it is running smoothly.
Repeat the above steps if it is necessary.
•
If the above procedure is unsuccessful in resolving the off-centre, you may need to increase
the belt tension.
Summary of Contents for ABI17-19-098
Page 1: ...BE4540...
