XXXXXEVBUM
PRE-PUBLICATION COPY - NOT FOR DISTRIBUTION TO CUSTOMERS - PROPRIETARY
Data Collection and Logging
The SPS Reader App offers three ways to view the SPS
sensor data. In the “Tags” tab, a tabulated list of all sensor
tags found is shown. Various pieces of the data can be
toggled on or off with the slider buttons at the top, such as
Sensor Code, Temp Code, or RSSI. Tags shown in this tab
can have their data plotted visually versus time in the
“Graph” tab. Please see Figure 4 below for sample screens
showing RSSI code information for a SPS tag.
Figure 4. Sensor information displayed under “Tags” and “Graph” tab
Certification
The SPS Reader App has a Certification Mode that should
only be used for Certification testing purposes. Toggling the
slider button will put the reader into Certification Mode
slider and the rest of the options on the page will be enabled.
Frequency, Power, and Wave Time are the three main test
parameters which can be set by the tester. The certification
mode also allows for a random data mode which can be
activated by the slider button at the bottom of the list of
options.
For Certification testing please follow the steps outlined
below:
1.
Select Frequency with the [Slider] or enter a
number to the right using keyboard
2.
Select Power with the [Slider] or enter a number to
the right using keyboard
3.
Click on [Send Wave] button
4.
Repeat Steps 1-3 for all required frequencies and
power levels.
Figure 5. Sensor information displayed under “Tags” and “Graph” tab
