Via Antonio Ferrero, 9 - Padova 35133 - Italy
Tel: +39 049 8876545
E-mail: [email protected] -
www.onautomation.com
CO
MPL
IES WIT
H
TO RESTORE THE DEFAULT SETTINGS, i.e. the settings before copying the code, proceed as follows:
•Press buttons 1 and 3 together: the LED flashes green and red in alternation for 10 seconds. The LED then stops
and flashes orange three times, slowly.
•Release buttons 1 and 3 and press button 2 during the third flash; the LED then flashes orange 5 times, quickly.
CAUTION!
Replacing the battery with an incompatible one can pose the risk of explosion. The battery contains polluting
substances and must, therefore, be disposed of not as ordinary waste but in accordance with local legislation on
recycling. Dispose of the battery in compliance with the applicable laws in force.
The Manufacturer, On Automation, declares that this transmitter complies with all the applicable technical standards
within the scope of the directive R&TTE 99/05/EC:
EN 300 220 - 1, EN 300 220 - 2
EN 301 489 -1, EN 301 489 - 3
EN 60950
