STAND: 17.06.2019
9910_Operation-Manual_STANDMOVE_M1-0_Rev1v0_EN
Seite 7 von 23
Danger:
There is a danger of being crushed when the desktop position is changed.
For this reason, make sure there are no objects or persons present in the danger
zone and do not reach into the danger zone.
Attention:
Modifications to the handswitch are strictly prohibited!
Danger:
The STAND.MOVE M1.0 must not be operated in potentially explosive
atmospheres!
Danger:
In case of a failure, it is possible that the desktop moves a bit during every
start-up attempt before the safety shut-down comes into play. Watch out for the
possible danger of being crushed.
Danger:
If the product is visibly damaged, do not assemble it or continue to use it!
Note:
When unpacking, ensure ESD-compliant handling of the electronic components
Danger:
Never immerse the hand switch in liquids and keep it away from heated sur-
faces.
3.4.2 Safety instructions für resellers
We consider resellers companies that purchase the STAND.MOVE M1.0 from Oelschläger
Metalltechnik
GmbH and that resell it as their own product after adding a table surface.
Note:
For reasons of EU conformity and product safety, we recommend that the users
provide their products with operating instructions in the respective official EU
language
Warning
: Be sure to enclose operating instructions in your finished product that in-
clude all safety instructions required by the consumer for the safe handling of your
product.
Note:
The operating instructions for your finished product must include the following
warning:
You must read these operating instructions before you start using the
product.
Point out to your consumer that the operating instructions must be kept near the
product.
Danger:
It is mandatory that you put your product through a risk analysis so that
you can react to any possible residual hazards (e.g. through structural measures or
warnings in the operating instructions and/or safety instructions on your product).
Warning:
Make sure that no unauthorised persons (small children, persons under
the influence of medication, etc.) handle your product or the STAND.MOVE M1.0
Repairs
Attention:
In the interest of preventing mal-functions, only authorised service person-
nel are permitted to make any repairs.
