STAND: 17.06.2019
9910_Operation-Manual_STANDMOVE_M1-0_Rev1v0_EN
Seite 5 von 23
3 Safety
This operating manual is to be preserved for future use. If a new copy nonetheless becomes necessary,
it is available, during the expected service life of the described product, from Customer Service of
Oelschläger
Metalltechnik
GmbH. Operating manuals of products that are currently being sold can be
downloaded from the website of the manufacturer. The manufacturer’s operating manual takes prece-
dence and must be followed without fail.
Purpose-conformant use of the product
This operating element – also briefly called the hand switch in the following - has been developed for
use on office desks in professional environments. Changes to the handswitch or use in the private sector
are not permissible. Contravention will render the warranty null and void and void the liability of the
manufacturer.
The handswitch must be assembled, put into operation and functionally checked by skilled personnel.
Special ambient conditions for using the handswitch can be found in chapter 12.
Target Group
These operating instructions are aimed at the following group of persons:
- The commissioning staff who assembles and commissions the sit/stand desks.
- Furniture installers, maintenance staff who commission the sit/stand desk in sales rooms or at
the final customer.
Knowledge of the following is a precondition for commissioning and installation of the operating element
STAND.MOVE M1.0 in combination with the table controller STAND.CONTROL C1 or C2:
- Mechanical and electrical basic knowledge (a corresponding training)
- Reading the operating instructions
Symbols used in the instructions
Danger
Stands for an immediate, threatening danger. If not warded off, it will result in death or
severe injuries.
Warning
Stands for a possibly threatening danger. If it is not avoided, death or very serious in-
juries may result.
Caution
Stands for a possibly threatening danger. If it is not avoided, light or minor injuries
may result.
Note
Designates a possibly harmful situation. If it is not avoided, the plant or something in
its surroundings can get damaged.
Warning of a source of danger.
Non-compliance with these warnings can result in harm to health, life-threatening inju-
ries and property damage.
Warning of electrical voltage.
Non-compliance with these warnings can result in injuries and property damage!
Warning of injuries caused by crushing.
Non-compliance with these warnings can result in harm to health, life-threatening inju-
ries and property damage
.
