9051_Bedienungsanleitung_C1_Rev2_EN_UK – Stand 08.08.2018 TS / MB
17
6.3 Operation with STAND.MOVE M1.1 hand switch with display and memory
(optional)
Hand switch Comfort - M1.1
This hand-switch is additionally equipped with a display for indication of the current desk height in centimetres
or inches.
Error messages and the status of the table are shown on the display (see Table2).
If you stop pressing the hand-switch after a while, the display turns off if no important operating condition is
being displayed. As soon as you press a button, the display switches back on.
The “Up” and “Down” or “Table up” and “Table down” keys move the table as described in 6.1.
Previously stored positions can be taken up with the position keys 1-4.
Note:
All hand switches are plug
-&-
play
-
capable and can be operated in parallel.
6.3.1 How to save a position:
Move the table to the desired height with the “Up” or “Down” keys.
Then press the “Logo” key (
is shown in the display) and then one of the position keys
1 to 4 (for example,
appears in the display). The process of saving is now ended and after approx. 2
seconds, the current table height is once again shown in the display. 4 different positions can be saved in this
manner.
6.3.2 How to retrieve a saved position:
Keep the desired memory setting pressed (1, 2, 3 or 4). The desk independently moves from the current
position to the saved position. The button has to be pressed until the position is reached; if you let go
beforehand, the desk stops moving.
“Up”
“Down”
Pos. 1 + 2
Pos. 3 + 4
“Logo” key
