OMS KEA 300 TGI, Use And Maintenance Manual

Page: 2 / 36

2
INTRODUCTION
 This manual has been created in order to provide customers with all the
information about the machine and the safety standards related to it, in
addition to the use and maintenance instructions that enable it to be used
in the best way possible, ensuring it remains efficient over time.
 This manual should be delivered to the persons in charge of using the
machine.
 The machines are subject to possible updates, so may feature different
details from the ones depicted. This possibility does not in any way
compromise the content of the manual.
 Our company thanks you for choosing this product and remains at your
disposal for any further information.
CONTENTS
CHAPTER 1 INFORMATION ON THE MACHINE ...................................... 6
1.1 GENERAL PRECAUTIONS ........................................................... 6
1.2 SAFETY DEVICES INSTALLED ON THE MACHINE .......................... 8
1.2.1 MECHANICAL SAFETY DEVICES ................................................. 8
1.2.2 ELECTRICAL SAFETY DEVICES ................................................... 8
1.3 DESCRIPTION OF THE MACHINE ................................................ 9
1.3.1 GENERAL DESCRIPTION ........................................................... 9
1.3.2 CONSTRUCTION CHARACTERISTICS .......................................... 9
1.3.3 COMPOSITION OF THE MACHINE .............................................. 10
CHAPTER 2 TECHNICAL DATA ............................................................. 12
2.1 DIMENSIONS, WEIGHT, SPECIFICATIONS .................................. 12
CHAPTER 3 RECEIVING THE MACHINE ............................................... 14
3.1 SHIPPING THE MACHINE ......................................................... 15
3.2 CHECKING THE PACKAGING UPON RECEIPT ............................... 16
3.3 DISPOSING OF THE PACKAGING ............................................... 16
CHAPTER 4 INSTALLATION ................................................................ 17
4.1 POSITIONING THE MACHINE .................................................... 17
4.2 ELECTRICAL CONNECTION ....................................................... 17
4.2.1 SLICING MACHINE WITH SINGLE PHASE MOTOR ........................ 17
4.2.2 SLICING MACHINE WITH THREE PHASE MOTOR ......................... 17